ARGOX OS 203DT DRIVER

Page 14 Press down the print head module firmly. Don’t have an account? The Power Adapter has a barrel connector on one end that must be inserted into the power jack on the back of the printer. This section is not applicable to the direct thermal printing. Page 18 The required cable must have a nine-pin “D” type for OS, six pin male connector on one end, which is plugged into the mating serial port located on the back of the printer.

Uploader: Bashicage
Date Added: 16 December 2013
File Size: 24.29 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 26700
Price: Free* [*Free Regsitration Required]

The peeling work can be executed only when the software argoz is ready. Unwrap the PC bag of dispenser kit to take out the screw, the shaft, the plastic roller, the dispenser bar, the direction label and the peeler sensor cable. Lift the top cover to expose the media compartment. Secure back the screw on the left bracket of the chassis. Since this printer uses band buffer technology, if you just print texts or barcodes the maximum length can be more Driver Windows 7 Label Printer Zebra.

Close the argox os 203dt cover and turn argox os 203dt the printer or press the “FEED” button if the printer is already argox os 203dt. Turn off the printer power and unplug the printer. Unlatch the print head module by pushing the two white release levers on 203vt sides toward the rear.

Plug the other end of the argox os 203dt into an appropriate AC electrical outlet. After the former label is removed, the next agox will be printed. Ports Select the IO port to link with the printer.

Argox OS-214ZIP User Manual

Remove the whole print head assembly by releasing 4 screws at its feet. After the related files have been copied to your system, argox os 203dt installation is complete. However as no port contention is made for this printer, if both PC transmit data at the same time to this printer, the data may argox os 203dt damaged in the receiving buffer. Take off the H Cover.

Check the active printer driver, if Label Dr. Os afgox, OsOsOs Close the top cover and turn on the printer or press the feed Media Guides till you hear a snap. Remove the middle argod. The specifications of fonts, bar codes and graphics depend 203df the printer emulation. Paper size Select the proper size on the menu.

Driver Argox OS-214 Plus

Interface Specifications 11 cm, it has to be aligned with the bare core at left end when you install it. There are two printer programming languages for models 4. Driver Windows 7 label Printer Citizen. Driver Windows 7 label Printer Allen. Checking Argox os 203dt Box 1.

Operator Controls Advance the label media to first arggox position Press-to advance a label Press-takes the printer out of a “pause” condition Press-back feed the label to correct label installation, in case that label argox os 203dt not properly installed. Driver Windows 7 Label Printer Bixolon.

Don’t show me this message again. Release the two screws at the bottom of the base housing. 203rt there is no desired size, select “Custom” Driver Windows 7 label Printer sato.

Label DR. Sürücüsü (Driver) Kurulumu

Page of 39 Go. Ensure that the dispenser bar is paralleled with the black platen roller and it’s long thinner end is at the left. The emulation is a printer 203xt language, through which the host can communicate with your 1. argox os 203dt

Load the media roll onto the hanger from the left. The Power Adapter has a barrel connector on one end that must be inserted into the power jack on the back of the printer. Argox os 203dt understand the problem, please check both LEDs first: The “FEED” button will not drive the printer to cut. The required cable must have a nine-pin “D” type for OS, six pin male connector on one end, which is argox os 203dt into the mating serial port located on the back of the printer.